There are sixteen vertical triangular-cut slide serrations at the rear of the slide. I would very much like to collect additional data about these guns to more accurately determine when this change was made. This change appears to have taken place at least by serial number ITo field-strip the pistol, engage safety 28 on safe, and remove and unload magazine The Modell I Schmeisser Pistol. A few guns have been noted without the comma. Raise sear spring housing with flat punch to allow removal of safety. E-mail Ed Buffaloe.
3 To disassemble further, drift extractor pin (2) upward out of slide, releasing Model I pistol was produced by the C. G. Haenel firm, Suhl, Germany.
Video: Cg haenel suhl schmeisser disassembly FN Browning M1905 .25 ACP Vest Pocket Pistol 1906 Jeff Shoots Stuff
The Haenel-Schmeisser Model I has a spring-driven firing pin as in the. The inscription on the left side of the slide is in sans-serif characters on one line and reads C.G. HAENEL SUHL, SCHMEISSER'S PATENT.
A few guns have. Ratso3 Member Posts: 2 (3/31/02 pm) Reply | Edit | Del All Schmeisser- C.G.
Haenelschmeisser Model I Firearms Assembly
During reassembly, safety must be installed in engaged position. There is no ejection port in the slide as in the Browning. When the pistol is cocked, a signal pin projects from the rear of the frame.
Raise sear spring housing with flat punch to allow removal of safety. Get Instant Access.
The only markings in the pistol reads "C. G. Haenel Suhl Schmeisser's Patent", so it's a pre WWII german pistol.
Though I'm familiar with several. C G Haenel Schmeisser ACP caliber pistol. Produced in the Ruger Mark II 22 LR Pistol Disassembly Assembly - YouTube Walther P22, 22lr, Weapons.
There is no ejection port in the slide as in the Browning. Slide Height.
Haenel Schmeisser calibre 6
Replace magazine and disengage safety. German Pistols and Revolvers, by Ian V. I have been unable to examine a gun with this feature and so I cannot comment on its purpose.
A reader has pointed out to me that this HS monogram is also a proprietary logo belonging to Siemens-Halske, which may account for the fact that it was eventually changed. When the pistol is cocked, a signal pin projects from the rear of the frame.
Cg haenel suhl schmeisser disassembly
|Haenel firm, Suhl, Germany.
This change appears to have taken place at least by serial number Haenel company was founded in by Carl Gottlieb Haenel. Pistol is shown cocked and unloaded, with safety disengaged. An indent in the back of the magazine, facilitated by a half-moon cut in the baseplate, fits into the groove on the guide rod and is used to pull it out for disassembly.
At this point the barrel can be lifted out of the frame.
Video: Cg haenel suhl schmeisser disassembly Haenel Suhl 312 ДЕКОНСЕРВАЦИЯ ДЕДУШКИ!!!
Remove recoil spring 11 and guide from frame.